Academic
Qualifications:
Degree/Examination |
Institution |
Class/Division/GPA
(Per cent marks) |
Year |
Ph.D. (Materials
Science) |
University of
Manchester-Institute of Science and Technology (UMIST), UK. |
Successfully
completed |
1995 |
M.Sc (Metallic and
Ceramic Materials) |
University of
Manchester-Institute of Science and Technology (UMIST), UK. |
First Class
(70.00%) |
1991 |
M.Sc. Engineering
(Metallurgical) |
BUET, Dhaka |
GPA = 3.42
(4 point basis) |
1988 |
B.Sc. Engineering
(Metallurgical) |
BUET, Dhaka |
First Class First
(in order of
merit) |
1986 |
Higher Secondary
certificate |
Chittagong
Government College, Chittagong |
First Division |
1980 |
Secondary School
Certificate |
Habilashdwip High
School, Patiya, Chittagong |
First Division |
1977 |
Experience
(start from present):
Position |
Organization |
Duration |
Associate
Professor |
BUET, Dhaka |
3rd December 1998,
to date |
Assistant
Professor |
BUET, Dhaka |
01 July 1990 - 3rd
December 1998 |
Lecturer |
BUET, Dhaka |
2 May 1989 - 01
July 1990 |
Membership/Fellowship
of Learned Societies, Professional Institutions and Other noteworthy
Affiliations, etc.
a) Member (Mem. NO.
350517), TMS (Metals, Materials and Minerals society), USA.
b) Fellow (# F01009
MM), BSME (Bangladesh
Society of Mechanical Engineer)
c) Member, Bangladesh
Ceramic Society, Bangladesh.
d) Member, Institution
of Engineers’, Bangladesh.
Professional Awards/Honours
Received:
a) Obtained
Commonwealth Scholarship in 1990 to undertake M.Sc and Ph.D. programme at
UMIST, UK, till 1993.
b) Received
“Chancellor’s Award” for securing the First Class First position in the
B.Sc. Engineering degree.
c) Received BUET Merit
Scholarship during B.Sc. Engineering programme in 1982, 1983 and 1984.
Professional
Work at National and International Levels:
a) Have taken a
project to minimise the percentage of rejection of insulation products of
Bangladesh Insulation and Sanitary-ware Factory (BISF), Dhaka.
b) Expert hands on
Diffusion Bonding (DB) experiments. Did couple of hundred of DB experiments
for Rolls-Royce plc, Barnoldswick, Lancashire, UK.
c) Hands-on experience
with TEM, SEM plus EDX, HIP autoclave, casting techniques, mechanical
testing, software development etc.
d) Taken a project to
find out possibility and feasibility to axe local raw materials in our local
ceramic industries.
Participation
in National Commissions, Committees, etc. commissioned by
the Government of Bangladesh and Govt. Institution/Organizations:
a) Worked as an active
member of the main group to solve the problems of different organizations
like Tiende Ceramics Company Ltd.
Bangladesh
Titas Gas, Bangladesh Railway, China-Bangla. Ceramic Industries Ltd.
Shinephukur Ceramics.
b) Member of “Glass
and ceramic Section, B.S.S-6” of Bangladesh standard and Testing Institution
(B.S.T.I) for the session of 2001-2003.
Information provided
below for activities since the last appointment/during last five years.
Teaching activities
undertaken (course and laboratory) at undergraduate and graduate levels
since last appointment (last five years):
Course No. and
Title of the Course Taught |
Level |
No. of Students |
Hrs/
week |
Year |
MME 321, Crystal
defects, deformation and fracture |
L-3, T-1 |
|
|
2000- till to date |
MME 365, Ceramics
& Glass Engineering
|
L-3,T-2 |
|
|
2001-till to date |
Met.E. 453,
Principles of Materials Characterization |
L-4,T-2 |
20 |
3 |
1998 |
Met.E. 411,
Mechanical Metallurgy-I |
L-4,T-1 |
20 |
3 |
’97 to 99’ |
Met.E.371,
Ceramics, Polymers and Composite Materials |
L-3,T-1 |
20 |
3 |
96 to till to date |
Met.E. 339,
Extractive Metallurgy |
L-3,T-2
|
20 |
3 |
‘96, |
Met.E.226,
Metallic Materials Sessional |
L-2,T-2 |
70 |
1.5 |
1995 till to date |
Met.E. 216,
Materials Testing Sessional |
L-2,T-2 |
20 |
3 |
‘97, 2001 |
Met.E.6107,
Failure Mechanism & Analysis |
M.Sc. |
5 |
3 |
’96 & ‘97 |
Met.E. 6402,
Composite Materials |
M.Sc. |
3 |
3 |
‘97 |
MME
Light Alloys |
M.Sc. |
4 |
3 |
2001 |
Supervision Thesis/Design
Project at Undergraduate Level since the last appointment:
No. of Students |
Project and Thesis
Title |
Year |
3 |
Formation of
alumina fibre in jute substrate |
’96, ’97, 2002 |
1 |
The study of
microstructure and property difference between diffusion welding and
electrical resistance welding |
‘97 |
1 |
Diffusion welding
of stainless steel |
‘97-98 |
5 |
Structure-property
relation in ceramic insulators |
‘97-98,2002 |
Supervision of
completed Graduate Research Work:
Level |
Thesis Title |
Year |
M.Sc. |
Hot Isostatic
Diffusion Welding of Titanium Alloys |
1997 |
M.Sc. |
Structure-property
relationship in high tension ceracmis insulator |
2002 |
Research Grants
Received (last fifteen years) :
Organization
Offering the grant |
Project Title |
Year |
BRTC, BUET |
Development of
software to analyze microstructural image (Image Analyzer) |
1996-97 |
IBBL, Bank,
Bangladesh |
Development of
ceramics for local industries |
2002 |
List
of punblications
a. Journal
Publications (recognised and refereed Journals).
1. Hoque, S.M.,
Choudhury, M.A. and Islam, M.F.
“Characterization of
Ni-Cu mixed spinal ferrite”
Journal of Magnetism
and Magnetic Materials 251 (2002), 292-303.
2. Islam M.F. and
Ridley, N.
‘Diffusion welding of
microduplex stainless steel’
Screipta Mat., 1998.
3. Islam, M. F.,
Pilling, J. and Ridley, N
‘Effect of surface
finish and sheet thickness on isostatic diffusion bonding of superplastic
Ti-6Al-4V’
Mat.Sci. Tech.,
December 1997, Vol. 13, 1045-1050.
4. Islam, M.F., and
Ridley, N.
‘Characterization of
diffusion bonds formed between Ti-6Al-4V and Titanium Aluminide Super
Alpha-2’
Mat.Sci. Tech., August
1996, Vol. 12, 623-627.
5. Pilling, J.,
Ridley, N., and Islam, M.F.
‘On the modelling of
isostatic diffusion bonding in materials: Superplastic Super
Alpha-2’
Mat.Sci. Eng., 1996, A
205, 72-78.
6. Islam, M.F. and
Haque, M.M.
‘Structure and
properties of centrifugally cast -Brass’ Mech. Engg. Res. Bull, Vol. 12,
1989, 31-36.
b. Conferences
(national and international conferences and seminars):
i) Procedings:
1. Islam, M.F. and
Alam, M.O.
‘Interface
Characxterfization of Isostatic Diffusion Welding between Dissimilar
Titanium Alloys’
Titanium - Extraction
and Processing, eds. Mishra, B. and Kipouros, G.J., TMS, Warrendale PA,
(1997), 175-186.
2. Haseeb, A.S.M.A.,
Islam, M.F., Alam, M.O. and Tofail, S.A.M.
‘Surface Hardening
Behaviour of Titanium Alloys in Carburization’ Titafnium - Extraction and
Processfing, eds. Mishra, B. and Kipourous, G.J., TMS Warrendale PA, (1997),
163-173.
3. Alam, M.O., Islam,
M.F. and Helali, M.M.
‘Diffusion Welding of
Ti-3al-2.5V by Hiping’
Proc. International
Conference on Structure, Processing andProperties fof Materials, SPPM’97,
15-17 November, 1997, Dhaka, Bangladesh, B53-61
4. Tofail, S.A.M. and
fIslam, M.F.
‘Alumina fibre:
Formation in Jutje substrate’
Proc. 3rd. Annual
Paper Meet, Mechanical Engineering Division, Institution of Engineers’,
Bangladesh, Chittagong, 1996, 22-27.
5. Ridley, N. and
Islam, M.F.
‘Isostatic diffusion
bonding of microduplex alloys’
Hot Isostatic
Pressing’93, ed. Delaey, L. and Tas, H., Elsevier Science B.V., (1994),
325-332).
6. Ridley, N., Islam,
M.F. and Pilling, J.
‘Superplasticity and
diffusion bonding of microduplex Super Alpha-2’ Structural Intermetallics,
ed. Darolia, R., Lewandowski, J.J., Liu , C.T. et al., TMS, Warrendale PA,
(1993), 63-68.
7. Alam, M.O. and
Islam, M.F.
‘Study on isostatic
diffusion welded samples of dissimilar titanium alloys’
Proc. 3rd. Annual
Paper Meet, Mechanical Engineering Division, Institution of Engineers’,
Bangladesh, Chittagong, 1996, 330-337.
8. Islam, M.F. and
Haque M.M.
‘Effect of process
variables on structure and properties of centrifugally cast Brass and
Aluminium’
Proc. and. Annual
Paper Meet. Mechanical Engineering Division, Institution of Engineers’,
Bangladesh, 20-23 September 1995, Rajshahi, 35-41.
9. Islam, M.F.
‘Diffusion bonding of
superplastic Titanium Aluminide’
Proc. 2nd Annual Paper
Meet. Mechanical Engineering Division, Institution of Engineers’,
Bangladesh, 20-23 September 1995, Rajshahi, 194-204.
10. Ridley, N., Islam,
M.F. and Pilling, J.
‘Isostatic diffusion
bonding studies on superplastic Ti-6Al-4V and Super Alpha-2 intermetallic
alloy’.
Titanium’92 - Science
and technology, ed. Froes, F. H. and Caplan, I.L., TMS, 2, (1993),
1625-1632.
i) Presentations:
1. Gave a presentation
on ‘An objective Analysis of Diffusion Welding’ in the “International
Conference on Structure, Processing and Properties of Materials, SPPM’97,
15-17 November, 1997, Dhaka Bangladesh.
2. Presented a paper
on ‘Surface Hardening Behaviour of Titanium Alloys in Carburization’ in the
“1997 Materials Week” in Indianapolis, Indiana, September 14-18, 1997,
jointly organised by TMS and ASM international.
3. Presented a paper
on ‘Interface Characterization of Isostatic Diffusion Welding between
Dissimilar Titanium Alloys in the “1997 Materials Week” in Indianapolis,
Indiana, September 14-18, 1997, jointly organised by TMS and ASM
internationa.
4. Gave a presentation
in one day conference on “Superplastic Discussions” held at UMIST organised
by the Institute of
Metals, UK, Materials
World, Vol. 1, September, 1993, 502.
5. Presented a paper
on ‘Isostatic Diffusion Bonding of Superplastic Microduplex Alloys’ in the
“Metals and Materials’ 93” conference held at UMIST, UK, April 1993,
organised by the Institute of Metals.
6. Presented a poster
and a paper on “Isostatic Diffusion Bonding Studies on Superplastic
Ti-6Al-4V and Super Alpha-2 Intermetallic Alloy” in the Seventh World
Conference on Titanium, 1992, San Diego, California, USA.
7. Presented a paper
on ‘Effect on some process variables on microstructure and properties of
centrifugually cast brass’ in the “33rd Annual Convention of the Institution
of Engineers” Bangladesh, held at Dhaka, March 27-30, 1989.
8. Gave a presentation
on “Future of ceramic processing in Bangladesh” In the 6th Annual paper meet
and International conference on Mechanical Engineering in the 21st Centery”
17-19 February 2000.
|